Ahad, 20 Januari 2013
Isnin, 7 Januari 2013
Error code untuk Printer Canon MP287
Berikut adalah senarai Error code yang biasa berlaku bagi printer Canon Mp287.
Jangan Risau jika anda mengalami permasalahan dalam membaiki printer tersebut kami sedia membantu- Izz Technology(Indera Mahkota 8).
An Error Code Is Displayed on the LED
Alarm Lamp Is Lit Orange
When a machine error occurs,
the Alarm lamp is lit orange and the error code as follows is
displayed on the LED. Check the error code displayed on
the LED and take the appropriate action to correct the error.
* Depending on the error
occurred, the Alarm lamp is not lit.
Error Code
|
Cause
|
|
|---|---|---|
E, 0, 2
(LED display)
|
The machine is out of paper./Paper does not feed.
|
|
E, 0, 3
(LED display)
|
Paper Output Tray is closed./Paper jam.
|
|
E, 0, 4
E, 0, 5
(LED display)
|
The FINE Cartridge cannot be
recognized.
|
|
E, 0, 7
(LED display)
|
FINE Cartridge is not installed in the correct
position.
|
|
E, 0, 8
(LED display)
|
||
E, 1, 3
(LED display)
|
The remaining ink level cannot be
detected.
|
|
E, 1, 4
(LED display)
|
The FINE Cartridge cannot be
recognized.
|
|
E, 1, 5
(LED display)
|
The FINE Cartridge cannot be
recognized.
|
|
E, 1, 6
(LED display)
|
The ink has run out.
|
|
E, 3, 0
(LED display)
|
The size of the original cannot be correctly
detected or the document is too small when the Fit-to-Page copying is
selected.
|
|
E, 3, 1
(LED display)
|
The machine is not connected with the
computer.
|
|
E, 5, 0
(LED display)
|
Scanning the print head alignment sheet has
failed.
|
POWER Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately
When the POWER and Alarm lamps flash alternately as
shown below, and the error code as follows is displayed on the LED, an error
requiring servicing might have occurred.
Error Code
|
Action
|
|---|---|
P, 0, 2
(LED display)
|
Cancel printing, turn off the machine.
Then clear the jammed paper or protective material that is
preventing the FINE Cartridge Holder from moving, and turn on the machine
again.
Important
|
P, 1, 0
(LED display)
|
Turn off the machine, and unplug the power cord of
the machine from the power supply.
Contact the service
center.
|
Other cases than above:
|
Turn off the machine, and unplug the power cord of
the machine from the power supply.
Plug the machine back in and turn the
machine back on.
If the problem is not resolved,
contact the service
center.
|
Sabtu, 5 Januari 2013
Tempat Claim Warranty Acer Di Malaysia

Service Centers Location
Highpoint HQ (Selangor)
1 Jalan TP6, Sime UEP Industrial Park, Subang Jaya, 47600 Subang Jaya, Selangor.
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays)
Tel: +603-80266226 Fax: +603-80245100
Highpoint Low Yat Plaza
Lot 4.20, 4th Floor, Plaza Low Yat, Off Jalan Bukit Bintang, 55100 Kuala Lumpur
Operating Hours: Daily from 10.30am to 9pm Tel: +603-21412942
Highpoint 32 Square
B-05-01, 3 Two Square, No.2, Jalan 19/1, 46300 Petaling Jaya, Selangor
Operating Hours: Mondays to Fridays from 10am to 8pm; Saturdays 10am to 3pm; Closed on Sundays
Tel: +603-74960188 Fax: +603-74960188
Highpoint Ipoh
No.56, Jalan Medan Ipoh 1E, Medan Ipoh Bistari, 31400 Ipoh, Perak D.R., (Near Jaya Jusco & Tesco Ipoh)
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays)
Tel: +605-5481171 Fax: +605-5466818
Highpoint Johor Bahru
17, Jalan Sri Plentong 3, Tmn Perindustrian Sri Plentong, 81750 Masai, Johor Bahru
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays)
Tel: +607-3882339 Fax: +607-3885411
Highpoint Kluang
No. 26 Jalan Gunung Lambak 1, Taman Gunung Lambak, 86000 Kluang, Johor
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays)
Tel: +607-7733770 Fax: +607-7714576
Highpoint Kota Bharu
1701 Tingkat Bawah Paya Bemban/Taman Sari, Jalan Hospital, 15200 Kota Bharu, Kelantan
Operating Hours: Sundays to Thursdays from 9am to 6pm (excluding public holidays)
Tel : +609-7472779 Fax : +609-7462428

Highpoint Kota Kinabalu
Lot 38 & 39, Lorong Karamunsing A, Karamunsing Warehouse, 88100 Kota Kinabalu, Sabah
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays)
Tel: +6088-270699 Fax: +6088-270 257
Highpoint Kuantan
B180 Jalan Dato' Lim Hoe Lek, 25000 Kuantan, Pahang
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays)
Tel: +609-5159715 Fax: +609-5165148
Highpoint Kuching
126 & 126A, Green Heights Commercial Centre, Lorong Lapangan Terbang 2, Green Heights, 93250 Kuching, Sarawak
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays)
Tel: +6082-459200 Fax: +6082-450203
Highpoint Melaka
15 & 17, Jalan Melaka Raya 13, Taman Melaka Raya, 75000 Melaka
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays)
Tel: +606-2817434 Fax: +606-2817431
Highpoint Miri
Lot 1003, Ground Floor, King's Commercial Centre, 1 KM, Miri-Bintulu Road, 98000 Miri, Sarawak
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays)
Tel: +6085-437377 Fax: +6085-438 377
Highpoint Penang
Wisma Perkeso Pulau Pinang, Level 5 (Left Wing) Block B, No 269, Jalan Burma (Pulau Tikus), 10538 Georgetown, Penang.
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays)
Tel : +604-2275711 Fax : +604-2275719
Highpoint Sandakan
Lot 3 & 4, Ground Floor, Block 22, Bandar Indah, Jalan Utara, 90000 Sandakan, Sabah
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays)
Tel: +6089-229 355 Fax: 089-229 311
Highpoint Seremban
56G, Lorong Haruan 5/2, Oakland Commerce Square, 70300 Seremban, Negeri Semblan
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays)
Tel: +606-6012092 Fax: +606-6011877
Highpoint Sibu
No.17, 1st Floor, Chengal Road, 96000 Sibu, Sarawak
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays)
Tel: +6084-330300 Fax: +6084-316300
Highpoint Tawau
No.15664, 2nd Floor, Lot 3 a MPT 299, Jalan St. Patrick (off Jalan Belumu), 91000 Tawau, Sabah
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays)
Tel: +6089-7690004 Fax: +6089-769 002
For More Information: Click Here
Jika ada kesulitan berkenaan Warranty anda, Izz Technology sedia membantu, Sila datang ke pusat servis kami.
Jumaat, 4 Januari 2013
How to run CCleaner from a USB drive
Why would you use this? Well, if you go to an Internet cafe and
browse the Web from there, you can use CCleaner portable on a USB
stick to erase your browsing tracks. Or, if you want to erase some
data from your work PC and they won't let you install software, the
portable version of CCleaner can come in very handy.
Note: CCleaner Portable and CCleaner do exactly the same thing.
To run CCleaner Portable, double-click the CCleaner.exe file in the CCleaner Portable folder.
Note: CCleaner Portable and CCleaner do exactly the same thing.
- Download the latest CCleaner Portable version (a ZIP file) at http://www.piriform.com/ccleaner/builds.
- Unzip the contents of the ZIP file into a folder.
To run CCleaner Portable, double-click the CCleaner.exe file in the CCleaner Portable folder.
Canon Pixma MP258 Error Code
Canon Pixma Mp258 Error Code and Possible Solution

P02 (Carriage error)
- Make sure no foreign material stuck to the print head railway.
- Clean and check the print head encoder strip cable (timing slit film or encoder strip is a white line on the back of the box set of ink lines may be missing or mess up the ink.
P03 (Line feed error): an error in
transmission line entering the line feed (LF) is a signal telling the printer
to move to another line or a whole new line that would not otherwise have reached
the end of the line.
- Check wire print head position (timing slit disk film) on the side of the machine.
- Check PCB logic board.
P05 (ASF sensor error) sensor for
paper feed error.
- Try to replace the following:
·
ASF / PE sensor unit.
·
Drive unit.
·
PCB logic board.
P06 (Internal temperature error): caused by abnormal heat inside the printer.
P07 (Ink absorber full): the Ink Wastepad (sponge) inside the printer is full
P07 (Ink absorber full): the Ink Wastepad (sponge) inside the printer is full
- Replace the wastepad inside the printer or install waste ink bin outside the printer
- then Reset counter protection.
P08 (Print head temperature rise error): caused by
thermal print head temperature exceeds a threshold.
- Replace the new cartridge print head and / or change a new logic board.
- Replace the logic board.
P15 (USB VBUS over current): caused by too much current, try
removing the USB cable and then plugin again, if solve the error, try to
replace with a new USB cable. If the error still exist replace the logic board.
P20 (Other hardware error): The failure of other hardware.
P20 (Other hardware error): The failure of other hardware.
- Try to replace the logic board.
P22 (Scanner error): a scanner malfunction.
- try to change the scanner unit or change a the logic board.
E13 or E16: Ink has run out
- Pressing the Stop / Reset button for 5 to 8 seconds until the led screen display number 1.
E04, E05, E14 or E15: Cartridge may not be installed properly
- Reinstall the ink cartridge.
Resource: Click Here
Khamis, 3 Januari 2013
Tips Penting Untuk Pembeli Komputer Yang Baru
Pembeli komputer baru, Sama ada anda membeli Laptop, Netbook, atau Desktop. Pastikan Anda PERIKSA TARIKH WARRANTY bagi komputer yang anda baru beli.Kerana Biasanya tarikh Warranty bagi komputer akan terus berjalan apabila komputer itu telah keluar daripada kilang yang membuatnya dan apabila sampai ke kedai yang menjual Komputer, Tarikh warranty telah kurang dari setahun apabila komputer itu sudah dibeli oleh anda.
Tapi anda jangan risau kerana Tarikh warranty itu boleh di kemaskini ketika anda DAFTAR semula komputer di laman web syarikat pengeluar komputer yang anda beli.Ramai pembeli komputer hari ini tidak mengemaskini tarikh pembelian komputer mereka. Keadaan ini menyebabkan Tarikh untuk warranty mereka tidak akan sampai setahun.
Untuk keselesaan anda kelak. pastikan simpan resit Pembelian komputer, bagi memudahkan anda untuk claim warranty bagi komputer yang mengalami kerosakkan kelak.Cara yang terbaik untuk anda adalah terus update kepada syarikat pengeluar komputer sama ada Dell, Acer, Hp, dan yang lain-lain. sama ada cara menelefon, daftar dalam internet, atau memastikan penjual komputer yang menjual komputer tersebut mengemaskini kepada anda.
Anda boleh melihat tarikh start warranty anda dan tarikh habis warraty anda di laman web bagi setiap pengeluar komputer.Contohnya: bagi Komputer Dell, Anda boleh masuk laman web dell dan lihat pada WARRANTY INFORMATION, bagi mengetahui status sebenar komputer anda, sama ada warranty telah berjalan ataupun telah tamat tempoh.
INGAT..... WARRATY AMAT PENTING BAGI ANDA UNTUK CLAIM BALIK ATAS KEROSAKKAN KOMPUTER YANG BERLAKU.
Kalau anda taknak buat takper.... kerana komputer seperti laptop, kalau rosak Motherboard, Harga Dalam Lingkungan RM800.00 JEEEEErrrrrrr. TAK Mahal. KAN.
Bagi mereka yang Ingin Bantuan untuk Melihat balik Tarikh Warranty untuk komputer mereka. anda boleh melayari laman web pengeluar atau DATANG TERUS ke Izz Technology dan kami akan bantu anda dalam apa jua permasalahan anda mengenai komputer.
Isnin, 31 Disember 2012
Keyboard Shortcuts
Keyboard shortcuts for Windows
SUMMARY


This article lists keyboard shortcuts that you can use with Windows.
MORE INFORMATION

Windows system key combinations
- F1: Help
- CTRL+ESC: Open Start menu
- ALT+TAB: Switch between open programs
- ALT+F4: Quit program
- SHIFT+DELETE: Delete item permanently
- Windows Logo+L: Lock the computer (without using CTRL+ALT+DELETE)
Windows program key combinations
- CTRL+C: Copy
- CTRL+X: Cut
- CTRL+V: Paste
- CTRL+Z: Undo
- CTRL+B: Bold
- CTRL+U: Underline
- CTRL+I: Italic
Mouse click/keyboard modifier combinations for shell objects
- SHIFT+right click: Displays a shortcut menu containing alternative commands
- SHIFT+double click: Runs the alternate default command (the second item on the menu)
- ALT+double click: Displays properties
- SHIFT+DELETE: Deletes an item immediately without placing it in the Recycle Bin
General keyboard-only commands

- F1: Starts Windows Help
- F10: Activates menu bar options
- SHIFT+F10 Opens a shortcut menu for the selected item (this is the same as right-clicking an object
- CTRL+ESC: Opens the Start menu (use the ARROW keys to select an item)
- CTRL+ESC or ESC: Selects the Start button (press TAB to select the taskbar, or press SHIFT+F10 for a context menu)
- CTRL+SHIFT+ESC: Opens Windows Task Manager
- ALT+DOWN ARROW: Opens a drop-down list box
- ALT+TAB: Switch to another running program (hold down the ALT key and then press the TAB key to view the task-switching window)
- SHIFT: Press and hold down the SHIFT key while you insert a CD-ROM to bypass the automatic-run feature
- ALT+SPACE: Displays the main window's System menu (from the System menu, you can restore, move, resize, minimize, maximize, or close the window)
- ALT+- (ALT+hyphen): Displays the Multiple Document Interface (MDI) child window's System menu (from the MDI child window's System menu, you can restore, move, resize, minimize, maximize, or close the child window)
- CTRL+TAB: Switch to the next child window of a Multiple Document Interface (MDI) program
- ALT+underlined letter in menu: Opens the menu
- ALT+F4: Closes the current window
- CTRL+F4: Closes the current Multiple Document Interface (MDI) window
- ALT+F6: Switch between multiple windows in the same program (for example, when the Notepad Find dialog box is displayed, ALT+F6 switches between the Find dialog box and the main Notepad window)
Shell objects and general folder/Windows Explorer shortcuts
For a selected object:- F2: Rename object
- F3: Find all files
- CTRL+X: Cut
- CTRL+C: Copy
- CTRL+V: Paste
- SHIFT+DELETE: Delete selection immediately, without moving the item to the Recycle Bin
- ALT+ENTER: Open the properties for the selected object
To copy a file
Press and hold down the CTRL key while you drag the file to another folder.To create a shortcut
Press and hold down CTRL+SHIFT while you drag a file to the desktop or a folder.General folder/shortcut control
- F4: Selects the Go To A Different Folder box and moves down the entries in the box (if the toolbar is active in Windows Explorer)
- F5: Refreshes the current window.
- F6: Moves among panes in Windows Explorer
- CTRL+G: Opens the Go To Folder tool (in Windows 95 Windows Explorer only)
- CTRL+Z: Undo the last command
- CTRL+A: Select all the items in the current window
- BACKSPACE: Switch to the parent folder
- SHIFT+click+Close button: For folders, close the current folder plus all parent folders
Windows Explorer tree control
- Numeric Keypad *: Expands everything under the current selection
- Numeric Keypad +: Expands the current selection
- Numeric Keypad -: Collapses the current selection.
- RIGHT ARROW: Expands the current selection if it is not expanded, otherwise goes to the first child
- LEFT ARROW: Collapses the current selection if it is expanded, otherwise goes to the parent
Properties control
- CTRL+TAB/CTRL+SHIFT+TAB: Move through the property tabs
Accessibility shortcuts
- Press SHIFT five times: Toggles StickyKeys on and off
- Press down and hold the right SHIFT key for eight seconds: Toggles FilterKeys on and off
- Press down and hold the NUM LOCK key for five seconds: Toggles ToggleKeys on and off
- Left ALT+left SHIFT+NUM LOCK: Toggles MouseKeys on and off
- Left ALT+left SHIFT+PRINT SCREEN: Toggles high contrast on and off
Microsoft Natural Keyboard keys
- Windows Logo: Start menu
- Windows Logo+R: Run dialog box
- Windows Logo+M: Minimize all
- SHIFT+Windows Logo+M: Undo minimize all
- Windows Logo+F1: Help
- Windows Logo+E: Windows Explorer
- Windows Logo+F: Find files or folders
- Windows Logo+D: Minimizes all open windows and displays the desktop
- CTRL+Windows Logo+F: Find computer
- CTRL+Windows Logo+TAB: Moves focus from Start, to the Quick Launch toolbar, to the system tray (use RIGHT ARROW or LEFT ARROW to move focus to items on the Quick Launch toolbar and the system tray)
- Windows Logo+TAB: Cycle through taskbar buttons
- Windows Logo+Break: System Properties dialog box
- Application key: Displays a shortcut menu for the selected item
Microsoft Natural Keyboard with IntelliType software installed
- Windows Logo+L: Log off Windows
- Windows Logo+P: Starts Print Manager
- Windows Logo+C: Opens Control Panel
- Windows Logo+V: Starts Clipboard
- Windows Logo+K: Opens Keyboard Properties dialog box
- Windows Logo+I: Opens Mouse Properties dialog box
- Windows Logo+A: Starts Accessibility Options (if installed)
- Windows Logo+SPACEBAR: Displays the list of Microsoft IntelliType shortcut keys
- Windows Logo+S: Toggles CAPS LOCK on and off
Dialog box keyboard commands
- TAB: Move to the next control in the dialog box
- SHIFT+TAB: Move to the previous control in the dialog box
- SPACEBAR: If the current control is a button, this clicks the button. If the current control is a check box, this toggles the check box. If the current control is an option, this selects the option.
- ENTER: Equivalent to clicking the selected button (the button with the outline)
- ESC: Equivalent to clicking the Cancel button
- ALT+underlined letter in dialog box item: Move to the corresponding item
Copy from: click here
Langgan:
Catatan (Atom)











.jpg)