Dont Throw it

opsss...dont throw it!!!!....IZZ technology can help you service your laptop/pc...

Bersama menjaga Komputer Anda

Raikan Hari Anda Bersama Izz Technology

Dari Kami Untuk Anda

Error code untuk Printer Canon MP287

Berikut adalah senarai Error code yang biasa berlaku bagi printer Canon Mp287.

 

Jangan Risau jika anda mengalami permasalahan dalam membaiki printer tersebut kami sedia membantu- Izz Technology(Indera Mahkota 8).

 

An Error Code Is Displayed on the LED

 

Alarm Lamp Is Lit Orange

When a machine error occurs, the Alarm lamp is lit orange and the error code as follows is displayed on the LED. Check the error code displayed on the LED and take the appropriate action to correct the error.

* Depending on the error occurred, the Alarm lamp is not lit.

Error Code	Cause
E, 0, 2 (LED display)	The machine is out of paper./Paper does not feed.
E, 0, 3 (LED display)	Paper Output Tray is closed./Paper jam.
E, 0, 4 E, 0, 5 (LED display)	The FINE Cartridge cannot be recognized.
E, 0, 7 (LED display)	FINE Cartridge is not installed in the correct position.
E, 0, 8 (LED display)	Ink absorber is almost full.
E, 1, 3 (LED display)	The remaining ink level cannot be detected.
E, 1, 4 (LED display)	The FINE Cartridge cannot be recognized.
E, 1, 5 (LED display)	The FINE Cartridge cannot be recognized.
E, 1, 6 (LED display)	The ink has run out.
E, 3, 0 (LED display)	The size of the original cannot be correctly detected or the document is too small when the Fit-to-Page copying is selected.
E, 3, 1 (LED display)	The machine is not connected with the computer.
E, 5, 0 (LED display)	Scanning the print head alignment sheet has failed.

POWER Lamp Flashes Green and Alarm Lamp Flashes Orange Alternately

When the POWER and Alarm lamps flash alternately as shown below, and the error code as follows is displayed on the LED, an error requiring servicing might have occurred.
 

Error Code	Action
P, 0, 2 (LED display)	Cancel printing, turn off the machine. Then clear the jammed paper or protective material that is preventing the FINE Cartridge Holder from moving, and turn on the machine again. Important Be careful not to touch the components inside the machine. The machine may not print out properly if you touch it. If the problem is not resolved, contact the service center.
P, 1, 0 (LED display)	Turn off the machine, and unplug the power cord of the machine from the power supply. Contact the service center.
Other cases than above:	Turn off the machine, and unplug the power cord of the machine from the power supply. Plug the machine back in and turn the machine back on. If the problem is not resolved, contact the service center.

Tempat Claim Warranty Acer Di Malaysia

Service Centers Location

Highpoint HQ (Selangor)
1 Jalan TP6, Sime UEP Industrial Park, Subang Jaya, 47600 Subang Jaya, Selangor. 
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays) 
Tel: +603-80266226      Fax: +603-80245100 

Highpoint Low Yat Plaza 
Lot 4.20, 4th Floor, Plaza Low Yat, Off Jalan Bukit Bintang, 55100 Kuala Lumpur 
Operating Hours: Daily from 10.30am to 9pm 
Tel: +603-21412942 

Highpoint 32 Square
B-05-01, 3 Two Square, No.2, Jalan 19/1, 46300 Petaling Jaya, Selangor 
Operating Hours: Mondays to Fridays from 10am to 8pm; Saturdays 10am to 3pm; Closed on Sundays
Tel: +603-74960188      Fax: +603-74960188 

Highpoint Ipoh
No.56, Jalan Medan Ipoh 1E, Medan Ipoh Bistari, 31400 Ipoh, Perak D.R., (Near Jaya Jusco & Tesco Ipoh) 
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays) 
Tel: +605-5481171      Fax: +605-5466818 

Highpoint Johor Bahru
17, Jalan Sri Plentong 3, Tmn Perindustrian Sri Plentong, 81750 Masai, Johor Bahru 
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays) 
Tel: +607-3882339      Fax: +607-3885411 

Highpoint Kluang
No. 26 Jalan Gunung Lambak 1, Taman Gunung Lambak, 86000 Kluang, Johor 
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays) 
Tel: +607-7733770      Fax: +607-7714576 

Highpoint Kota Bharu 
1701 Tingkat Bawah Paya Bemban/Taman Sari, Jalan Hospital, 15200 Kota Bharu, Kelantan
Operating Hours: Sundays to Thursdays from 9am to 6pm (excluding public holidays) 
Tel : +609-7472779      Fax : +609-7462428 

Highpoint Kota Kinabalu
Lot 38 & 39, Lorong Karamunsing A, Karamunsing Warehouse, 88100 Kota Kinabalu, Sabah 
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays) 
Tel: +6088-270699      Fax: +6088-270 257 

Highpoint Kuantan
B180 Jalan Dato' Lim Hoe Lek, 25000 Kuantan, Pahang 
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays) 
Tel: +609-5159715      Fax: +609-5165148 

Highpoint Kuching
126 & 126A, Green Heights Commercial Centre, Lorong Lapangan Terbang 2, Green Heights, 93250 Kuching, Sarawak 
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays) 
Tel: +6082-459200      Fax: +6082-450203 

Highpoint Melaka
15 & 17, Jalan Melaka Raya 13, Taman Melaka Raya, 75000 Melaka 
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays) 
Tel: +606-2817434      Fax: +606-2817431 

Highpoint Miri
Lot 1003, Ground Floor, King's Commercial Centre, 1 KM, Miri-Bintulu Road, 98000 Miri, Sarawak 
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays) 
Tel: +6085-437377      Fax: +6085-438 377 

Highpoint Penang
Wisma Perkeso Pulau Pinang, Level 5 (Left Wing) Block B, No 269, Jalan Burma (Pulau Tikus), 10538 Georgetown, Penang. 
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays) 
Tel : +604-2275711      Fax : +604-2275719 

Highpoint Sandakan
Lot 3 & 4, Ground Floor, Block 22, Bandar Indah, Jalan Utara, 90000 Sandakan, Sabah 
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays) 
Tel: +6089-229 355      Fax: 089-229 311 

Highpoint Seremban
56G, Lorong Haruan 5/2, Oakland Commerce Square, 70300 Seremban, Negeri Semblan 
Operating Hours: Mondays to Fridays from 9am to 6pm (excluding public holidays) 
Tel: +606-6012092      Fax: +606-6011877 

Highpoint Sibu
No.17, 1st Floor, Chengal Road, 96000 Sibu, Sarawak 
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays) 
Tel: +6084-330300      Fax: +6084-316300 

Highpoint Tawau
No.15664, 2nd Floor, Lot 3 a MPT 299, Jalan St. Patrick (off Jalan Belumu), 91000 Tawau, Sabah 
Operating Hours: Mondays to Fridays from 8.30am to 5.30pm (excluding public holidays) 
Tel: +6089-7690004      Fax: +6089-769 002 

For More Information: Click Here

Jika ada kesulitan berkenaan Warranty anda, Izz Technology sedia membantu, Sila datang ke pusat servis kami.

How to run CCleaner from a USB drive

  provide a special version of CCleaner you can install to and run from a USB drive.

 Why would you use this? Well, if you go to an Internet cafe and browse the Web from there, you can use CCleaner portable on a USB stick to erase your browsing tracks. Or, if you want to erase some data from your work PC and they won't let you install software, the portable version of CCleaner can come in very handy.

Note: CCleaner Portable and CCleaner do exactly the same thing.

1. Download the latest CCleaner Portable version (a ZIP file) at http://www.piriform.com/ccleaner/builds.
2. Unzip the contents of the ZIP file into a folder.

The contents of this folder contain all the files you need to run CCleaner Portable. You can now copy this folder to a USB stick.

To run CCleaner Portable, double-click the CCleaner.exe file in the CCleaner Portable folder.

 

 

Canon Pixma MP258 Error Code

Canon Pixma Mp258 Error Code and Possible Solution

P02 (Carriage error)

1. Make sure no foreign material stuck to the print head railway.
2. Clean and check the print head encoder strip cable (timing slit film or encoder strip is a white line on the back of the box set of ink lines may be missing or mess up the ink.

P03 (Line feed error): an error in transmission line entering the line feed (LF) is a signal telling the printer to move to another line or a whole new line that would not otherwise have reached the end of the line.

1. Check wire print head position (timing slit disk film) on the side of the machine.
2. Check PCB logic board.

P05 (ASF sensor error) sensor for paper feed error.  

1. Try to replace the following:

·         ASF / PE sensor unit.

·         Drive unit.

·         PCB logic board.

P06 (Internal temperature error): caused by abnormal heat inside the printer.

P07 (Ink absorber full): the Ink Wastepad (sponge) inside the printer is full

1. Replace the wastepad inside the printer or install  waste ink bin outside the printer
2. then Reset counter protection.

P08 (Print head temperature rise error): caused by thermal print head temperature exceeds a threshold.

1. Replace the new cartridge print head and / or change a new logic board.

P09 (EEPROM error): caused by corrupted or defective EEPROM chips of the printer.

1. Replace the logic board.

P15 (USB VBUS over current): caused by too much current, try removing the USB cable and then plugin again, if solve the error, try to replace with a new USB cable. If the error still exist replace the logic board.

P20 (Other hardware error): The failure of other hardware.

1. Try to replace the logic board.

P22 (Scanner error): a scanner malfunction.

1. try to change the scanner unit or change a the logic board.

E13 or E16: Ink has run out

1. Pressing the Stop / Reset button for 5 to 8 seconds until the led screen display number 1.

E04, E05, E14 or E15: Cartridge may not be installed properly

1. Reinstall the ink cartridge.

 Resource: Click Here

Untuk sebarang bantuan bagi anda yang mengalami masalah seperti di atas. Izz Technology sedia membantu anda bagi menyelesaikan permasalahan mengenai Printer- datang terus sahaja ke Kedai kami.

Tips Penting Untuk Pembeli Komputer Yang Baru

 Pembeli komputer baru, Sama ada anda membeli Laptop, Netbook, atau Desktop. Pastikan Anda PERIKSA TARIKH WARRANTY bagi komputer yang anda baru beli.

Kerana Biasanya tarikh Warranty bagi komputer akan terus berjalan apabila komputer itu telah keluar daripada kilang yang membuatnya dan apabila sampai ke kedai yang menjual Komputer, Tarikh warranty telah kurang dari setahun apabila komputer itu sudah dibeli oleh anda.
Tapi anda jangan risau kerana Tarikh warranty itu boleh di kemaskini ketika anda DAFTAR semula komputer di laman web syarikat pengeluar komputer yang anda beli.

Ramai pembeli komputer hari ini tidak mengemaskini tarikh pembelian komputer mereka. Keadaan ini menyebabkan Tarikh untuk warranty mereka tidak akan sampai setahun.

Untuk keselesaan anda kelak. pastikan simpan resit Pembelian komputer, bagi memudahkan anda untuk claim warranty bagi komputer yang mengalami kerosakkan kelak.

Cara yang terbaik untuk anda adalah terus update kepada syarikat pengeluar komputer sama ada Dell, Acer, Hp, dan yang lain-lain. sama ada cara menelefon, daftar dalam internet, atau memastikan penjual komputer yang menjual komputer tersebut mengemaskini kepada anda.

Anda boleh melihat tarikh start warranty anda dan tarikh habis warraty anda di laman web bagi setiap pengeluar komputer.
Contohnya: bagi Komputer Dell, Anda boleh masuk laman web dell dan lihat pada WARRANTY INFORMATION, bagi mengetahui status sebenar komputer anda, sama ada warranty telah berjalan ataupun telah tamat tempoh.

INGAT..... WARRATY AMAT PENTING BAGI ANDA UNTUK CLAIM BALIK ATAS KEROSAKKAN KOMPUTER YANG BERLAKU.
Kalau anda taknak buat takper.... kerana komputer seperti laptop, kalau rosak Motherboard, Harga Dalam Lingkungan RM800.00 JEEEEErrrrrrr. TAK Mahal. KAN.

Bagi mereka yang Ingin Bantuan untuk Melihat balik Tarikh Warranty untuk komputer mereka. anda boleh melayari laman web pengeluar atau DATANG TERUS ke Izz Technology dan kami akan bantu anda dalam apa jua permasalahan anda mengenai komputer.